diamond hand tools

Basically Diamond Tools are considered any type of tool that uses Diamonds as an abrasive for cutting.

Usually the “cutting teeth” are metal segments made up of metallic powders and diamond crystals. These segments are then shaped into rectangular teeth and then welded to the metal core of the tool.

There are many different types of diamond tools being used every day in the construction industry for cutting a wide variety of materials such as: Reinforced Concrete (Concrete with Rebar), Cured Concrete (Old Hardened Concrete), Asphalt, Asphalt over a layer of Concrete, Brick, Block, Stone, Marble, Granite, Tile, Glass, Ceramics, Porcelain & many more materials.

A Diamond Blade is a circular saw blade used on High Speed Gas Powered Cut-Off Saws, Walk Behind Saws, Angle Grinders, Table Saws, Tile Saws, etc. A Grinding Cup is a circular grinding tools with diamond segments on one side only. A Core Bit is a long hollow tube with diamond segments on the tip.

There are many more types of Diamond Tools such as Concave Diamond Blades for cutting curves in Counter Tops (Installing Sinks in Counter Tops), Ductile Blades for cutting steel, Diamond Polishing Pads for Polishing Marble, Tuck Pointers for removing mortar and restoring old brick walls, Crack Chasers for repairing cracks in walls and many more.

4 Good Reasons Why Woodworkers Should Use Diamond Sharpeners – From a South African Perspective

Executive Summary about Diamond Tools by Andrew Smit

The first reason is their ability to stay flat and not to groove like other conventional sharpeners (oil stones, Japanese water stones and ceramics). Woodworkers can then focus on sharpening their tools, not the additional task of maintaining a flat surface on their sharpening stones.

Secondly, diamond sharpeners dramatically speed sharpening to save time and labour costs. The constant flatness of diamond sharpeners also help maintain the tool angle to the sharpener.

The third reason is their economical benefit in providing optimum control of carbide removal to extend the life of carbide tooling compared to sharpening services with diamond wheels. Diamonds are the hardest material known. Because of this, carbide tooling life can be extended 5 to 7 times when sharpened on diamond sharpeners.

The fourth benefit of diamond sharpening stones is the cleanliness. Diamond sharpeners come in a spectrum of diamond sizes. Typical of most manufactures are the following ranges: 220 grit/9 micron (x-course), 325 grit/45 micron (course), 600 grit/25 micron (fine) and 1200 grit/9 micron (extra fine).

Sizes are measured primarily by mesh. The micro size used depends primarily on the tool to be sharpened. For rapid sharpening the 325 grit (course) is recommended. The 600 (fine) efficiently hones precision tools and refines the edges honed by the 220 (x-course) and 325 (course) grits.

Good quality diamond sharpeners use uniform diamond sizes to produce a superior finish to woodworkers tools.

Article you may be interested in reading: Diamond Bracelets and Conflict Diamonds